outline drawing maximum ratings outline dimensions ( ) inch mm typical performance data frequency (mhz) insertion loss (db) operating temperature -40c to 85c storage temperature -55c to 100c power input 0.5w max. applications ? defense communications ? receivers/transmitters ? harmonic rejection of vcos features ? wide selection of cut-off frequencies ? excellent rejection ? custom models available return loss (db) frequency (mhz) group delay (nsec) _ x low pass filter SCLF-1000+ rev. f m158359 SCLF-1000+ 170313 surface mount 50 ? dc to 1000 mhz SCLF-1000 insertion loss 0 20 40 60 80 100 10 100 1000 10000 frequency(mhz) insertion loss (db) at rf level of 0 dbm SCLF-1000 return loss 0 10 20 30 40 50 10 100 1000 10000 frequency(mhz) return loss (db) at rf level of 0 dbm SCLF-1000 group delay 0.0 1.0 2.0 3.0 4.0 5.0 10 412 814 1216 1618 2020 frequency (mhz) group delay (nsec) at rf level of 0 dbm pin connections input 1 output 8 ground 2,3,4,5,6,7 demo board mcl p/n: tb-187+ suggested pcb layout (pl-049) 10.00 0.00 0.00 44.50 10.00 0.90 158.80 0.10 0.00 26.20 12.00 1.10 307.50 0.20 0.00 25.80 14.40 1.00 456.30 0.20 0.00 41.20 17.20 1.20 605.00 0.30 0.00 26.40 20.70 1.10 753.80 0.40 0.00 19.80 24.70 1.20 902.50 0.50 0.00 17.80 29.60 1.10 1000.00 0.80 0.10 14.60 35.50 1.10 1200.00 7.00 1.50 2.30 42.50 1.10 1400.00 23.40 1.76 0.60 50.90 1.10 1444.00 27.10 1.78 0.50 61.00 1.10 1488.00 30.80 1.80 0.50 73.10 1.10 1532.00 34.50 1.90 0.40 87.60 1.10 1576.00 38.40 2.00 0.40 104.90 1.10 1620.00 42.40 2.30 0.40 125.70 1.10 1664.00 46.80 2.60 0.30 150.50 1.10 1751.20 58.50 4.40 0.30 180.30 1.10 1838.40 67.20 4.00 0.20 216.00 1.10 1925.60 60.90 1.90 0.20 258.70 1.10 2012.80 59.60 1.40 0.20 313.40 1.20 2106.00 59.60 1.30 0.20 375.50 1.20 2188.00 61.20 1.10 0.20 454.90 1.20 2227.00 62.60 1.40 0.20 544.90 1.20 2266.00 63.30 1.60 0.20 660.10 1.30 2305.00 64.30 1.50 0.20 790.70 1.40 2344.00 65.40 1.90 0.20 1000.00 1.80 2383.00 67.40 2.50 0.20 1200.00 2.00 2422.00 68.40 1.70 0.20 1390.20 1.20 2461.00 72.40 4.90 0.20 1620.00 0.70 2500.00 73.60 3.40 0.20 2017.50 0.50 pcb land pattern suggested l a yout, toleranc e to be within .002 a bcd e fg 0.75 0.38 0.28 0.01 0.05 0.02 0.2 19.05 9.65 7.11 0.25 1.27 0.51 5.08 h j k m n p wt 0.075 0.6 0.45 0.47 0.1 0.15 grams 1.91 15.24 11.43 11.94 2.54 3.81 1.60 permanent damage may occur if any of these limits are exceeded. electrical specifcations parameter f# frequency (mhz) min. typ. max. unit pass band insertion loss dc-f1 dc-1000 1.0 db freq. cut-off f2 1200 3.0 db vswr dc-f1 dc-1000 1.7 :1 stop band rejection loss f3-f4 1620-2100 20 db f4-f5 2100-2500 40 db vswr f3-f5 1620-2500 18 :1 electrical schematic typical frequency response dc f1 f2 f3 f4 f5 40 20 3 1 frequency attenuation (db) r f i n r f o u t case style: yy161 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
